White FFP2 NanoFiber Masks – Box of 10

9.90 ex VAT

Discover FFP2 Nanofiber masks, providing protection as FFP3 standards (99%).

Anti-fog 4 layer breathable & comfortable face mask

Prices exclusive of vat.

Description

Features:

  • Anti-fog! Helps prevent foggy frames
  • Soft, light, and perfect sealing
  • Breathable & comfortable Face Mask
  • Makes breathing easier than standard masks
  • Easy to store thanks to its foldable design and unique packaging
  • Tested and approved according to CE standards
  • 4 Layers of protection

ffp2 mask

ffp2

 

 

 

 

 

 

 

 

All maintenance-free dust respirators that are placed on the European market must be approved according to the requirements of the European Personal Protective Equipment Directive REG. EC / 425 / 2016.

Standards:

  • EN 149 : 2001 + A1 : 2009
  • REGULATION (EU) 2016 / 425
  • ISO 13485 : 2016

Intended use: These particulate respirators are designed to protect against solid and non-volatile liquid particles.

Classification: There are three equipment classes : FFP1 /FFP2 /FFP3 ( see marking on box and on mask ). For the disposable folded Respirator marked “NR” representing Non-Reusable and shall be disposed after one shift.

Approvals: These respirators are tested by SGS institution, and audited by MNA LABORATORIES IND. TRADE. CO. LTD. These respirators are CE marked in accordance with the requirements of European Regulation (EU) 2016/425. The applicable legistraion can be determined by reviewing the certificate and Declaration of Conformity when requested.

Model Number: MKF-94

Fitting Instructions:

  • 1. Hold the disposable folded respirator in position over the nose and mouth.
  • 2. Pull the straps behind to ears, attach the straps to the retaining dip, improve comfort and prevent leakage
  • 3. Ensure the nose clip is securely moulded around the nose, resting the ends against the cheek to obtain a good seal.
  • 4. To check for proper fit, cup both hands over the mask and exhale vigorously. If air leaks around the nose, tighten the nose clip, if air leaks
  • around the edge, reposition the straps for better fit.
  • 5. Repeat adjustments until the mask is sealed properly.
  • 6. If a proper seal cannot be achieved do not enter the contaiminated area or it may cause illness.

 

 

 

 

 

 

 

Storage:

1. Store in accordance with manufacturer’s instructions.

2. Storage temperature should be between -30 °C to +40 °C.

3. Storage humidity should be less than 80%.

4. When storing or transporting this respirator, use original packaging provided.

5. Do not store in direct sunlight.

Nanofiber-Based Face Masks and Respirators as COVID-19 Protection: A Review

Related Documents:

FFP2 (MKF-94 NANOFIBER) 

DoC MNA

FFP2 (MKF-94 NANOFIBER) – EN ELECTRONIC LABELING

FFP2 (MKF-94 NANOFIBER) – MODULE B

FFP2 (MKF-94 NANOFIBER) – MODULE C2

FFP2 (MKF-94 NANOFIBER) – TECHNICAL DATA SHEET